This step by step diy woodworking project is about2×4 raised garden bedplans. I continue my series of projects from 2x4s with this super simple garden bed. I have designed this garden bed so you keep the costs as low as possible. If you afford, choose weather resistant lumber and your garden bed will last for ages. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.
There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden. See all my Premium Plans HERE.
Projects made from these plans
Raised Garden Bed from 2x4s Plans
Building-a-raised-garden-bed-from-2x4s
Cut & Shopping Lists
- A– 8pieces of 2×4 lumber – 69″ long, 8 pieces – 48″ longBED
- B– 6pieces of 2×4 lumber – 14″ longSUPPORTS
- C–2 pieces of 2×4 lumber – 52 1/2″ long, 2 pieces – 76″ longTRIMS
- D – 2pieces of 2×4 lumber – 7 1/2″ long, 4 pieces – 10 1/2″ longBENCH SUPPORTS
- E – 3 pieces of 2×4 lumber – 24″ longSEAT
- 17 pieces of 2×4 lumber – 8′
- landscape fabric
- 2 1/2″ screws, 3 1/2″ screws
- soil
Tools
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
Post hole digger, Concrete mixer
Safety Gloves, Safety Glasses
Time
One day
Related
- Pyramid planter plans
- Strawberry planter plans
It’s that simple to build a 2×4 garden bed!
2×4 Raised Garden Bed Plans
Assembling-the-frames
The first step of the project is to build the frames for the raised garden bed. Therefore, you need to cut the components from 2x4s at 48″ and 69″. Align the edges with attention, making sure the corners are square. Drill pilot holes through the 48″ long components and insert 2 1/2″ screws into the perpendicular components.
Assembling the raised garden box
Build 4 frames in total and then stack them one on top of the other, as shown in the plans. Make sure the edges are aligned and leave no gaps between them. It is essential to stack the frames on a level surface, from the very beginning.
Fitting the supports to the ends
Next, attach the 2×4 supports to the ends of the raised garden bed. Center the supports to the panels and clamp them into place. Drill pilot holes and insert 2 1/2″ screws to secure them into place tightly.
Fitting-the-side-supports
Fit the supports to the sides of the garden bed, in the same manner described above.
Fitting the top trims
Use 2×4 lumber for the top trims. Use a miter saw to to make the 45 degree cuts to both ends of the trims. Align and secure the trims into place with 2 1/2″ screws.
Assembling-the-supports-for-the-seat
Use 2×4 lumber for the seat supports. Use a miter saw to make the 45 degree cuts. Align and assemble everything with 2 1/2″ screws.
Fitting the seat supports
Fit the supports to sides of the garden bed. Drill pilot holes and insert 2 1/2″ screws to lock the supports into place.
Fitting the seat slats
Fit the 2×4 slats to the supports to create the bench seat. Center the slats, drill pilot holes and insert 2 1/2″ screws to lock them to the supports.
DIY Raised Garden Bed made from 2x4s Plans
Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and then smooth the rough surfaces with sandpaper. Staple landscaping fabric inside the planter, so you protect the wood. Fill the planter box with appropriate soil and then plant the vegetables.
Apply a few coats of paint or stain to the bench to protect it from the elements.
Raised Garden Bed made from 2x4s Plans
This is asimple woodworking project, so any person with basic diy skills can get the job done in a few hours.If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. Choose from thousands of free designs and fill your life with DIY joy!
This woodworking project was aboutraised garden bed from 2x4s plans. If you want to see more outdoor plans, we recommend you to check out the rest of mystep by step projects.LIKEus on Facebook and Google + to be the first that gets out latest projects.
EXPLORE MORE IDEAS FOR:
Ovidiu
I've been a designer and a woodworker since I first developed consciousness.
